How Much Does Appliance Repair Cost?

Learn the typical price of professional appliance repair from Sparks Appliance Repair:

Your kitchen is filled with large electrical appliances. An electrical stove, dishwasher or refrigerator requires the right wiring. In the event any appliance is incorrectly installed, it poses a legitimate chance of fire in a home. In order to guarantee your electrical kitchen appliances are in good order, it’s important to hire a trained service for Sparks appliance repair.

DIY electrical service for appliances isn’t a recommended idea. There are one or two minor repairs where DIY can be possible. In those times, be sure to use the proper tools and to always turn off the power source.

Repairing larger appliances, however, is more difficult. Don’t try DIY repair. Your range, for an example, will require a 250- or 125-volt circuit depending on if it is completely electrical or gas-powered, plus you will want no less than two 20-amp, 125-volt circuits to run smaller appliances. These types of circuits will carry multiple electrical outlets, just don’t overload them — which often will mean, a third is needed.

The risk of a short (and therefore critical injury or death) during any larger project most of the time isn’t worth it. It’s best to call a professional service in Sparks, Nevada.

You should do a search for appliance repair companies in Sparks on on Google. Look for businesses with good reviews. Or find a a recommendation from a coworker if you’re running into difficulties with an oven, microwave or refrigerator.

Hiring appliance repair services starts with finding a contractor in Sparks that has experience in service of kitchen appliances. Some companies are appliance-specific, and won’t provide repair for all types of household appliances.

The primary reason some local appliance repairmen won’t be safe to repair a kitchen appliance is due to all of the electrical appliances that use water to run. Most refrigerators use water to make ice cubes and dishwashers need water to wash dishes. Water is potentially dangerous should there be electrical repairs.

If electrical repairs aren’t done properly and a waterline ruptures, for example, there’s a real possibility of electrocution. Water and electricity do not go well together.

That’s why you should hire a Sparks repairman who can handle both.

Well trained appliance repairmen can cost anywhere from $45 to $75 an hour for their work, and individual contractors may charge somewhere between $75 and $120 an hour. This could sound like a lot, but it is much better to pay a higher price for excellent work. If a repair service costs less than $30 an hour, be suspicious.

It’s important to be sure the service has a permit from Sparks for any type of electrical work. Some unqualified repairmen will say that they won’t need a permit, but never listen. Always check with Sparks officials.

Most technicians in Sparks can charge a standard amount for their travel, from $50 to $60. You’ll have to pay the complete price whether or not the repair is done, so have a list on-hand of appliances for the company to inspect.

The national average is $159 for oven repairs – services in Sparks will typically charge $80 to $140 per hour. Expect a $60 to $75 trip charge too for the company to drive and inspect the problem.

The prices for brand new kitchen appliances can range between $325 and $8,000. The wide range is dependent on the kind of kitchen appliance, such as a high-price refrigerator compared to a standard dishwasher.

Repairing or installing an electrical appliance is possibly the most difficult repair projects one can require in a kitchen.

A possible way to avoid these types of electrical issues is listening very attentively to a repairman when he or she provides an estimate for repair. Specific types of wire must be used dependent on the type of kitchen appliance, and colors of wires (for ground and neutral) might differ when state laws or requirements are updated.

Additionally, many jurisdictions now demand arc fault protection for all kitchen electrical circuits in addition to ground fault circuit interruption (GFCI) protection. If the service provider fails to mention this, or says that you do not “need” them, it is time to hire someone else.

Additionally, it is important to monitor a contractor closely when he or she performs the initial inspection of the refrigerator. If it is a new kitchen appliance the service is installing, ask if it is able to use the same circuit or if it needs an upgrade because there are major size and electrical power usage differences in the newest models. The same recommendation goes for dishwashers and stoves.

A professional have to be able to describe what they are going to do, why it’s needed and go over each part of the final price, which likely includes appliance parts, labor and miscellaneous. There are some appliance repair services willing to wave the trip fee if repair is done.


Appliance Repair Tips
Appliance Safety
Repair or Replace Appliances
Refrigerator Parts